Carrier Access BROADway System 770-0125-AB, Руководство по установке

Страница: 67 / 96

BROADway - Release 4.00 3-19
Configuration
Setting the System Date and Time
Setting the System Date and Time
The BROAD way system maintains a real-time clock to assist in ensuring event and alarm times are
properly recorded in the system. This section describes how to set the real-time clock from the GUI and
command line interfaces.
Setting the Date and Time Using the GUI
To set the date and time on the BROAD way system:
1. In the menu bar, click Config , then Date &
Time .
2. In the Date & Time window, enter the date
and time.
- To set the BROAD way system to the
same date and time as your workstation,
click
Set to Today .
- Alternately, enter the date and time you
require using the
Year , Month , Day ,
Hour , and Minute fields.
3. Click OK .
Setting the Date and Time Using TL1
To view the system date and time, use the
RTRV-DAT
TL1 command:
RTRV-DAT::NSP:1234::;
To change the system date and time, use the
ED-DAT
command:
ED-DAT::NSP:1234::YY-MM-DD,HH-MM-SS;
YY-MM-DD
—The two-digit year, month, and day of the system date.
HH-MM-SS
—The time (24-hour clock) of the system.
For example:
ED-DAT::NSP:1234::03-07-01,15-35-00;
This command changes the date to July 1, 2003 and the time to 3:35 PM.