Carrera RC 370503013, Руководство по сборке и эксплуатации

Страница: 12 / 32

12
If the Quadrocopter moves on its own fast
or slow forwards, press the upper right
trimmer for forwards / backwards in steps
downwards. If the Quadrocopter moves
backwards, press the trimmer for forwards /
backwards in steps upwards.
17 When hovering and without you moving the
lever for circling on the spot, if the Quadro-
copter rotates to left or right, proceed as
follows: If the Quadrocopter rotates quickly
or slowly to the left around its own axis,
press the trimmer for rotation below left in
steps to the right. If the Quadrocopter ro-
tates to the right, press the trimmer for rota-
tion in steps to the left.
Changing the rotor blades
18 Use a smooth narrow object to help draw
off a rotor blade if necessary. Make sure
that you draw the rotor blade with great
care vertically upwards, and hold the mo-
tor from below to stabilise it.
19 QR code for motor-change system,
spare parts and further information.
20 WARNING!
Be sure to note the marking and colour,
also the tilt angle of the rotor blades!
Front left: red – marking “B”
Front right: red – marking “A”
Rear right: black – marking “B”
Rear left: black – marking “A”
Troubleshooting
Problem: Remote control does not work.
Cause: The ON/OFF-power switch is
turned “OFF”.
Solution: Turn the ON/OFF-power switch “ON”.
Cause: The batteries have been wrongly
inserted.
Solution: Check if the batteries have been
correctly inserted.
Cause: The batteries do not have enough
power.
Solution: Insert new batteries.
Problem: The Quadrocopter cannot be con-
trolled with the remote control
Cause: The power switch on the remote
control is turned “OFF”.
Solution: First turn the power switch on the
remote control “ON”.
Cause: The remote control is possibly not
correctly frequency bound with the receiver
on the Quadrocopter.
Solution: Please carry out the binding pro-
cedure as described in “Checklist for flight
preparation“.
Problem: The Quadrocopter does not lift.
Cause: The rotor blades rotate too slowly.
Solution: Slide the gas lever up.
Cause: The battery´s power is not sufficient.
Solution: Charge the battery (see chapter
“Charging the battery”).
Problem: During flight, the Quadrocopter
loses speed and height without any obvious
reason.
Cause: The battery is too weak.
Solution: Charge the battery (see chapter
“Charging the battery”).
Problem: The quadrocopter only flies in a cir-
cle or turns over on starting.
Cause: Rotor blades incorrectly fitted or
damaged.
Solution: Fit rotor blades / replace rotor
blades as described in
18 19 20
.
Errors and changes excepted
Colours / final design – changes excepted
Technical changes and design-related changes excepted
Pictograms = symbolic photos
ENGLISH