Carrera RC 370503013, Руководство по сборке и эксплуатации

Страница: 11 / 32

11
If you notice that the Quadrocopter moves
forwards or to the side without your touching
the respective lever, please adjust the trim of
the Quadrocopter as described in
14 15 16 17
.
9 +/- Gas (up / down)
To start or to fly higher, push the gas le-
ver on the left cautiously forwards. To land
or fly lower, push the gas lever on the left
cautiously backwards.
10 To make the Quadrocopter circle to the left
or the right on the spot, move the lever on
the left cautiously to the left or the right.
11 To fly the Quadrocopter to the left or the
right, push the lever on the right cautiously
to the left or the right.
12 To fly the Quadrocopter forwards or back-
wards, push the lever on the right cautious-
ly forwards or backwards.
Looping function
WARNING!
ONLY FOR EXPERIENCED PILOTS!
13 a If you press the “Looping Button”, then an
acoustic signal sounds 5x times. As long as
the acoustic signal sounds, slide the right-
hand joystick up, down, to the right or to the
left. The Quadrocopter then carries out the
loop or roll in the respective direction. Be-
fore you do this, make sure you have ample
room on all sides (about 2.5 m – 8‘).
Beginner/Advanced switch
WARNING!
100 % IS ONLY FOR EXPERIENCED PILOTS!
13 b 30% = beginner mode
Signal sounds once on switching over.
60% = medium mode
The quadrocopter reacts more sensitively
than in 30 % mode. Signal sounds twice
on switching over.
100% = Advanced Modus -> 3D Modus
The Quadrocopter reacts very sensitive-
ly to joystick movements. Signal sounds
three times on switching over.
Headless Mode
13 c The headless mode helps beginners
learn how to fly. Regardless of which di-
rection the Quadrocopter is rotated, the
flight direction always corresponds exactly
to the flight direction implemented on the
controller. Therefore a beginner no longer
has to steer mirror-imaged when he flies
e.g. to himself.
If you press the “Headless Mode Button”
9
, an acoustic signal sounds for as long
as you are in the Headless mode. To de-
activate the Headless mode, press the
button renewed.
Trimming the Quadrocopter
14 Auto-trimming
1. Place the Quadrocopter on a hori-
zontal surface.
2. Link the Quadrocopter with the con-
troller as described in “Linking the
model with the controller”.
3. Slide the gas lever and the lever for
forward / back simultaneously into
the right lower corner. The LED on the
Quadrocopter flashes on briefly and
then lights up continuously. The signal-
ling tone will sound once.
4. The neutral setting is completed.
15 When hovering, if the Quadrocopter flies to
the left or right without you moving the lever
for left / right movement, please proceed as
follows:
If the Quadrocopter moves on its own fast
or slow sideways to the left, press the low-
er right trimmer for right / left tilt in steps to
the right. If the Quadrocopter moves right,
press the trimmer for right / left tilt in steps
to the left.
16 When hovering, if the Quadrocopter flies
forwards or backwards without you mov-
ing the lever for forwards or backwards
movement, please proceed as follows:
ENGLISH