CARRE PENTASEM Series, Инструкции по сборке и использованию, Страница: 32 / 44

31
B.5 Marking
To set the marking mode, select the SETTINGS screen and press
Figure 9
The target number of passes can range up to 10, with symmetrical,
asymmetrical left or asymmetrical right marking modes.
The console displays the sower/sprayer width combination for the target
number of passes.
B.6 Pre-start function
This function is used especially with a front dosing hopper. The pre-start
function assists in avoiding unsowed areas especially in field corners. This starts
the dispenser at the CALIBRATION speed while the sower is still stopped, and as
such starts the primes the sower until the seed arrives at the sowing units just
before the sower starts to work.
The settings for this function are carried out through tests and error tests when
the system is turned on for the first time, and are then adjusted in the SETTINGS
menu.
To use the pre-start function, press in the MAIN screen before moving.
The motor will start at the CALIBRATION speed for a preset period of time, or
until the forward speed exceeds 2km/H, and then the automatic regulation takes
over.
Increase/decrease the
number of target passes Mode select
The sprayer width
calculation is based
on the width of the
sower, the number
of target passes and
the marking mode.
Symmetric Symmetric left Symmetric right