CARRE PENTASEM Series, Инструкции по сборке и использованию, Страница: 20 / 44

19
In this case, sowing must be carried out during the first pass with only half the working
width of the sower, or distribution must be disconnected for the corresponding portion of
the sprayer or fertiliser distributor.
The odd rates (i.e. 3, 5, 7, etc.) mark out lines in a single pass.
Before using for the first time, check that the lines are marked out with a spacing
that complies with what you are looking for! The sowing tines in the line must not
leave seed.
5.5.6 Sower control
Before leaving the farm to go to the place of use, you are advised to check the following:
•
The sower is compliant with the instructions concerning transport on roads.
•
The hitching of the sower to the tractor.
•
The setting of the track marking (rate)
•
The opening and closing of the electric valves by the track marking device.
•
The track marking and the electronic control of the sower when changing tractors.
•
All of the sowing tines sow. (Turn on the blower and allow the distribution to operate,
by passing in front of the radar, seed should then be on the ground under each tine).
•
The elbow is positioned, as instructed, under the injector.
•
The beige inverter on the dispenser and the air flap on the blower are in the desired
position.
•
The divider cover in the distribution head, all the rows or 1 out of 2.
•
The closing of the drain trapdoor.
•
The filtering sieve in the hopper.
Fertilisation or
treatment
machine track
Even rate
Odd rate