twice. The car wash mode is now on. Press the reset switch 5 times again. The siren will chirp one. The car
wash mode is no off.
19. Power off memory: When the power is switched off and later turned on, the system remembers and
remains in the status before the power failure.
20. Emergency disarm (ACC On): When the transmitter is out of work, please open the door and press the reset
switch to disarm.
21. Valid switch: When driving and any door is opened and closed again, the system will activate its anti-
hijacking function. The LED will be on, after 40 seconds the siren will chirp loudly, flash lights will gleam
and the engine will be cut off. Press the reset switch to deactivate the function.
CENTRAL DOOR LOCKING SYSTEM TIME OPTION
If you don’t have an electric central door locking system, but a pneumatic locking system, please open the brain
cover and change jumper JP1 on the main PCB from ON to OFF before installing the car alarm. The central door
locking system time will be changed from 0,5 to 3,5 seconds.
ADDING TRANSMITTERS TO THE SYSTEM
In total max. 4 transmitters can be added to the alarm system. Put the car key into the key lock and switch to
ACC On. Press the reset switch 5 seconds. The siren will chirp 5 sounds and the LED indication will be on.
• Within 10 seconds, press any button on the first transmitter until the siren chirps 2 times.
• Within 10 seconds, press any button on the second transmitter until the siren chirps 3 times.
• Within 10 seconds, press any button on the third transmitter until the siren chirps 4 times.
• Within 10 seconds, press any button on the fourth transmitter until the siren chirps 5 times.
The LED indication will go off.
attentIon: tHe addIng of transmItters wIll stop after no aCtIons wItHIn 10
se-Conds, key Is taken out of key loCk or wHen four transmItters are added.
eVery tIme you add a transmItter, you HaVe to add all your transmItters.
MAIN UNITS
Brain unit:
1
Transmitter:
2
Shock sensor:
1
LED indicator:
1
Wire harness:
1
Relay:
1
Siren:
1
User manual:
1
Reset switch:
1
INSTALLATION INSTRUCTION CAR ALARM
• Brain unit: The brain unit is usually placed under the instrumental panel or another disguised place. Place
the brain unit where all wires can be connected. The brain unit can be attached with Velcro tape with a sticky
back.
Содержание 0260060
Страница 2: ......
