13
Carolina Cooker®
844-478-4334
Model M68853
January 2021
Be careful not to cross thread
the connector. Hand tighten only.
Do not use tools to tighten this connection.
4. Make sure the hose is not kinked and is routed away
from any sharp edges or hot surface. The LP cylinder
should be placed at least 24 inches away from the
appliance.
The supply hose can be a trip
hazard. Tripping over the gas
supply hose can cause spillage of hot oil or food,
resulting in serious burns. Place the LP cylinder away
from human or pet traffic. Do not walk between the
appliance and the LP cylinder.
5. Perform the Soapy Water Test described in the
following section to check for leaks.
NOTICE
WARNING
!
3. Connect the hose and gas regulator assembly to the
LP cylinder.
5.5 Soapy Water Test
• The soapy water test must be performed outdoors in a
well-ventilated area.
• Do not perform the test around open flames, sparks, lit
matches, lighters, or cigarettes.
• Never use an open flame to test for gas leaks.
The “soapy water test”
must
be performed each time:
• the LP cylinder is reconnected, or
• any time the appliance has been moved, or
• at least once per year and/or the appliance has not
been used for more than 60 days.
1. Remove the cast iron pot from the base.
2.
The regulator shut-off valve and the LP cylinder
valve should be in the OFF or closed position.
SAFETY INSTRUCTIONS
3. Prepare a soapy water solution by combining one
part dish washing liquid with three parts water .
4. Apply the soapy water solution to all connections
between the LP cylinder and the shut-off valve.
Open the LP cylinder valve.
(with the shut-off valve in the closed position).
5. Inspect the LP cylinder connection for bubbles.
Close the LP cylinder valve immediately if bubbles
appear.
6. Retighten the loose connection and repeat the test.
