Carlton SP4012, Руководство пользователя

Страница: 54 / 139

SP4012 SERVICING BELTS
34
Replacing V-Belt
SAFETY
•
NEVER SERVICE A MACHINE WITH THE ENGINE RUNNING, SEVERE
PERSONAL INJURY COULD OCCUR. TURN ENGINE OFF THEN REMOVE
IGNITION KEY AND DISCONNECT POSITIVE BATTERY CABLE TO AVOID
STARTING MACHINE ACCIDENTALLY.
•
CUTTER WHEEL MUST BE DISENGAGED BEFORE TURNING ENGINE
ON/OFF AND BEFORE SERVICING A MACHINE. OTHERWISE SEVERE
PERSONAL INJURY COULD OCCUR AS WELL AS MACHINE DAMAGE.
•
ALL MACHINE PARTS MUST COME TO A COMPLETE STOP AND HAVE
TIME TO COOL COMPLETELY BEFORE SERVICING A MACHINE OR
SEVERE INJURY COULD OCCUR, POSSIBLY SERIOUS BURNS AND/OR
DISMEMBERMENT. DO NOT OPERATE A MACHINE WITHOUT A
COMPLETE NUMBER OF TEETH IN THE CUTTER WHEEL PROPERLY
INSTALLED. EXCESSIVE MACHINE VIBRATION WILL OCCUR CAUSING
PREMATURE BEARING FAILURE AND EQUIPMENT DAMAGE.
•
PLACE THE CUTTER WHEEL ON THE GROUND WHEN PERFORMING
SERVICE ON A MACHINE.
•
Remove V-belt guard cover, which is
held on with ten bolts.
•
Belt should be disengaged. If it isn’t,
push the engagement lever back toward
the cutter wheel as far as it will go.
Engine slide will lock automatically
when the belt is disengaged. Belt will be
loose when disengaged.