CARLO GAVAZZI UWP 3.0, Руководство пользователя, Страница: 36 / 45

How to install an UWP 3.0 system
36
1.6 Ethernet connection
The Ethernet port is used to provide at the same time:
a) field bus connection to TCP/IP based buses (Modbus/TCP, Bacnet)
b) LAN/WAN connection to use the
UWP 3.0 through the automation server, web-server access, UWP
3.0 Tool
The
UWP 3.0 is configured by using the UWP 3.0 Tool , which has to be connected via the LAN port on
the top of the UWP 3.0 .
When connecting the network cable, the Ethernet port LEDS will also light up.
To configure the IP address, please refer to the
UWP 3.0 Tool software manual.
The LAN connection can be used to connect the UWP 3.0 to an Ethernet network when it has to be connected
to other devices over TCP/IP such as the BTM-Tx-24 display.
The TCP/IP device can be connected
directly to the
UWP 3.0 with a peer to peer
connection by using fixed IP (see the UWP
3.0 Tool manual to configure a fixed IP).
The TCP/IP devices can be connected to
the
UWP 3.0 via a router by using both
DHCP addressing or fixed IP with NAT
forwarding if the
UWP 3.0 is to be
visualised via the Internet.
UWP 3.0
UWP 3.0