CARLO GAVAZZI UWP 3.0, Руководство пользователя, Страница: 33 / 45

How to install an UWP 3.0 system
33
Recommendations:
Do not connect one SH1DUPFT to two Dupline® networks, otherwise the two buses will be short-circuited: the
situation below must be avoided.
This connection must be avoided otherwise two Dupline® networks will be short circuited. If this
should happen, the system will not be damaged since the bus is protected, but it will not work
properly
.
1.4 The wireless bus WiDup
Please see the manual How to install the smart-building wireless system .
1.5 How to connect the Mobile modem
The USB Dongle Connection Module SH2DSP24 has to be connected to the UWP 3.0 through the
auxiliary bus on the left side of the UWP 3.0 . The modem can be used to send/receive messages or to
access the Internet when the Ethernet LAN connection is not available.
The modem is configured by means of the
UWP 3.0 Tool software: the user has to define the modem
brand/model, the connection parameters, the phone numbers from/to which it has to receive/send the
messages, the type of connection required (Data connection always active, Data connection if LAN not
available, Only LAN).