CARLO GAVAZZI POWERSOFT, Инструкция по эксплуатации

Страница: 50 / 74

PowerSoft
PowerSoft – Instruction manual
50
only a memo). To add or modify any festive day, the Holiday section of the
bandscolor.cfg file (on the PowerSoft/Configurations folder) is to be
manually modified. The displayed year is shown on the top of table A. The
arrows allow browsing the previous or following years.
Clicking a day of the year in the calendar (table A), the relevant subdivision
in time bands is displayed in table B. In table B, the tariff number and
colour are associated to each hour of the day. Note that the colours of the
tariffs are independent of the colours of the days.
In table C it is possible, by associating a colour, to enable the tariffs (up to
12) and to assign a maximum contractual power to each tariff (to be used in
the graphical trends module and in the contractual alarm management).
5.5.2 M
ODIFICATION OF THE TARIFFS
5.5.2.1 T
ARIFF COLOURS AND RELEVANT CONTRACTUAL POWER
To modify the colour associated to a tariff, double click on the colour box,
on table C. The colour dialogue box appears. In the next box, the
contractual power of that tariff can be edited.
5.5.2.2 S
ETTING OF THE DAY COLOURS
Each day of the calendar (table A) has a particular colour, that is the same
of each day with the same time bands subdivision. Double clicking on a
day, the colour dialogue box appears. Changing the colour of a particular
day, all the days with the same time bands subdivision assume the same
colour.
5.5.2.3 S
ETTING THE TIME BANDS
To set the time bands in a day, the number of the actual tariff is to be
edited in the proper cells relevant to the hours composing that time band.
All the cells with the same tariff assume the same colour; the new
configuration of the day is valid, only after confirmation, by pressing the
Set button. To assign the same configuration to other days, it is not
requested to repeat the same procedure more times: a copy/paste function
is available. The day is to be selected in the calendar (table A) and the Ctrl-