CARLO GAVAZZI POWERSOFT, Инструкция по эксплуатации

Страница: 26 / 74

PowerSoft
PowerSoft – Instruction manual
26
3.4.2 V
ARIABLES
This section shows the real-time values of all the variables of the selected
instrument. Clicking on one of the variables, the details of the selected variable are
displayed on the bottom of the table; the details are: the last real-time value, the
minimum, maximum and average values calculated from the last recording (variable
data log on the hard disk), and the time of the last recording.
If one of the variables exceeds the relevant setpoint, the background of the
same variable is red.
The background of the meters (energy, gas, or water) is always sky-blue.
3.4.3 I
NPUTS
/O
UTPUTS
This section shows the status of the digital inputs and the digital output of the
selected instrument. This section is available if the instrument is equipped with the
proper hardware and if the inputs/output are properly set in the configuration
process.