G38xx14 Configuration Software
ISA alarm
Passive detector input
Operation:
Normally open input, no transmission on channel. If transmission outlasts the Input delay,
the input signals fail, and the channel will start flashing. If the input signal failure has been
Acknowledged, the channel will stay on. Only upon acknowledgement will a Reset enable a
new detection.
Upon transmission on the assigned Disable channel, the input (zone) is switched out of the
ISA alarm.
Parameters:
Disable channel. Input delay 0 to 255 secs. (See note Disable channel.)
Active detector input
Operation:
Normally closed input, transmission on channel. If missing transmission outlasts the input
delay, the input signals fail, and the channel will start flashing. If the input signal failure has
been acknowledged, the channel will stay on. Only upon acknowledgement will a Reset
enable a new detection.
Upon transmission on the assigned Disable channel, the input (zone) is switched out of the
ISA alarm.
Parameters: Disable channel. Input delay 0 to 255 secs. (See note Disable channel.)
Acknowledge
Operation:
Acknowledges any active failures and turns off the Siren.
Parameters: None.
Reset
Operation:
Resets any Acknowledged failures and turns off the Siren.
Parameters: None.
Lamp Test
Operation:
While activated, all detector input channels are turned on (Mimic display test).
Parameters: None.
2000 Carlo Gavazzi Industri A/S. All rights reserved.
23
