Label creation
Vario II series
48
Operating manual
12.11
Press key
and the display indicates the following text mask:
Press key
E
to access the next field.
Selected values are only accepted if the entry was confirmed with key
.
Press key
and
to increase and/or decrease the number of mask
record (number of lines).
Y - Distance from top in mm
It is measured from upper label margin to lower left point of
corresponding line.
H - Module width
Width of a module (rectangle) in mm
T - Type of code
57 = QR Code
Z - Character set
Used character set for coding of data.
Mode
Data sector
Data density
N = Numeric
Figures 0-9
(ASCII 0x30-ASCII 0x39)
3 signs/
10 Bit
A =
Alphanumeric
Figures
0 - 9
(ASCII 0x30 - ASCII 0x39)
Letters
A - Z
(ASCII 0x41 - ASCII 0x5A)
Special characters
SP
(ASCII 0x20),
$
(ASCII 0x24),
%
(ASCII 0x25),
*
(ASCII 0x2A),
+
(ASCII 0x2B),
- (ASCII 0x2D),
.
(ASCII 0x2E),
/
(ADCII 0x2F),
:
(ASCII 0x3A)
2 signs/
11 Bit
B = 8-bit Byte
Character set 8-bit Latin/Kana
1 sign / 8 Bit
K = Kanji
Character set Kanji (shifted)
1 sign / 13 Bit
X - Distance from right side in mm
It is measured from right label margin to upper left point of
corresponding line.
V - Code model/Masking
The first two figures specify the code model:
Model 1 – old, use only because of compatibility reasons
Model 2 – current state for new systems
The last two figures specify the masking:
Evenly / good structured distribution of pale and dark sectors inside
the symbol.
1 = Automatic masking
0-7 = Manual selection
8 = No masking - direct acception of symbol
Mask entry QR Code