Cargo Floor B.V.
P.O. Box 271
7740 AG COEVORDEN
The Netherlands
Phone: +31 (0)524-59 39 00 www.cargofloor.nl
Fax: +31 (0)524-59 39 99
CF500 cylinder repair regulations, Article No. 9305003
03-09-2008 / GB 6 of 26
Threaded rod disassembly
Remove the bolts from the command lips; figure 7.0 (M6 x 50, 2 x spanner 10).
Loosen the nut on the mechanical front control plunger (Ø 16 mm) of the control valve. To achieve
this, position a spanner 17 on the back of the control valve and another spanner 17 on the front of the
valve; figure 8.0. Turn the threaded rod and remove it from the mechanical pre steering plunger; figure
9.0. If this is not possible because the spring is pressing against the command lip, first turn the 2 M10
(2 x spanner 17) nuts slightly back (away from the command lip).
Figure 8.0
Figure 7.0
Figure 9.0
