Cargo Floor B.V.
P.O. Box 271
7740 AG COEVORDEN
The Netherlands
Phone: +31 (0)524-59 39 00 www.cargofloor.nl
Fax: +31 (0)524-59 39 99
CF500 cylinder repair regulations, Article No. 9305003
03-09-2008 / GB 22 of 26
Valve block assembly
The assembly of the valve block should be performed in the reverse order of the disassembly process.
Please ensure that all caps from the oil channels have been removed when carrying out the assembly.
Check that the channels are clean.
Use copper grease for the assembly in relation to the bolts. Tighten the bolts (4 x M8 x 75, spanner 13)
using 30 Nm. Check whether the right choke is under the PB plug (refer to the arrow in figure 17.0) on
the bottom of the control valve; figures 42.0 to 44.0.
Figure 44.0
Figure 43.0
Figure 42.0
