Caretec Zeitgeist 2, Руководство пользователя

Страница: 9 / 35

9
•
If an hourly reminder is enabled, the reminder will be muted, but the device will
vibrate every full hour.
• The light notification jingles will be muted.
• The button lock (key lock) Jingle will be muted and the device will only signal that
the device is locked by vibration.
W
ARNING
Do not forget to deactivate the silent mode when it is no longer needed,
otherwise you may miss calendar events or alarms.
Note: Simultaneously press the bottom and middle button short ( Middle
SHORT)
to cancel the vibration playback of an alarm, timer or calendar event silently,
while the information about it remains available.
5 Operating states and RESET / troubleshooting
A distinction is basically made between three operating states:
•
Home screen ..................................................................... section 5.1
•
Functions menu (main menu) ............................................ section 6
•
System settings (Settings sub-menu) ................................ section 7
The device will respond to buttons being pressed whatever its operating state.
Should it no longer do so, either the battery is flat or the built-in computer has frozen.
To perform troubleshooting and restore operation, proceed as follows:
•
If the battery is flat, this will be indicated by the fact that the display remains dark.
In this case, plug in the USB charger (power adapter plus cable). Most settings will
be retained, although the clock time and alarms will be lost. After charging the
device, you should preferably use the automatic time setting feature via GPS; see
section 7.8.
•
If you happen to lose your way in the sub-menus, it is a good idea to simply return
to the home screen. You can do this by simply putting the device down and
waiting for max. 30 seconds or by pressing the button combination Top+Bottom
SHORT .
• If the computer really has frozen, the software has to be reset
(RESET)
. In this
case your settings will be retained (except for the alarms):
Place the device flat on a table and hold down the buttons Top+Bottom VERY
LONG , i.e. 12 seconds.
The Zeitgeist 2 will then vibrate strongly, play a start-up jingle and restore
functioning on the display.
Now leave the device for between 15 and 30 seconds without moving it until
another jingle sounds (ping noise). During this period, various sensors have to be
calibrated by the software. If the device is moved, this will adversely affect the
accuracy of some functions, e.g. the compass.
•
If the device is basically still functional but all settings are incorrect, you can also
restore the factory settings . Careful as this will cause all settings to be lost!
For details see the relevant function in the Settings menu, section 7.6.