Caretec Zeitgeist 2, Руководство пользователя

Страница: 30 / 35

30
You can currently switch it on and off (Bluetooth icon shown in the status bar of the
display), but since there are not yet any devices in existence with such reception
capability except in the lab, you should leave it disabled.
Caretec, the manufacturer, is thinking of supplying other Caretec devices that include a
watch function but not time synchronization, with the exact time via the Zeitgeist 2.
7.9.1 “Pillow” / Bed shaker
The manufacturer Caretec now has a way of boosting the effect of the ringing alarm with
an additional accessory:
This little box, going by the name of “Pillow”, is inserted between your mattress and bed
frame or under your pillow. It contains a powerful vibrating motor that generates
movements with alternating vibration patterns (the patterns are preprogrammed and
cannot be changed). These vibrations are transmitted through your mattress and pillow
to your ear/body. If you also keep the Zeitgeist 2 on your beside table, it too will vibrate
and generate acoustic signals. This combination of signals should be enough to wake
you up from even the deepest sleep!
This extra accessory is also ready for release and set to go on sale soon. Ask your
dealer about it!
To use the bed shaker, proceed as follows:
1. Insert the required batteries in the Pillow and switch it on. It will buzz briefly three
times to indicate it is now on standby.
2. Position the Pillow near the Zeitgeist 2.
3. After calling up Bluetooth settings, activate the Pillow on the Zeitgeist 2 using
Top
or Bottom SHORT and confirm with Middle SHORT .
4. The Zeitgeist 2 now prompts you with an acoustic message to press the top or
bottom button to start searching for the Pillow – a process known as Bluetooth
pairing that takes place with other Bluetooth-based devices.
5.
The search should last no longer than 30 seconds max, followed by an acoustic
message confirming that the operation was successful. The Zeitgeist 2 then
returns to the home screen and confirms pairing by showing the Pillow / Bed
Shaker icon in the status bar of the display, see display in section 2.3.
Please note: The Zeitgeist 2 cannot detect whether the Pillow has been switched off or
is out of range. If this is the case, the icon will still be displayed. With the short-range
radio used in Bluetooth, the range is normally several meters, for example inside a room.
The Pairing icon will not disappear until the connection is manually disabled, as
described below in "Note 3".
6. From now on, whenever the Zeitgeist 2 sounds an alarm, the Pillow will also start
to vibrate a few seconds later, with alternating vibration patterns and differing
vibration intensity levels. If you do not switch off the ringing alarm manually, the
Pillow will stop vibrating after three minutes. The Zeitgeist 2 will remain active for
another two minutes and then switch off after a total of five minutes.