Caretec Zeitgeist 2, Руководство пользователя

Страница: 31 / 35

31
Note 1:
If pairing of the two devices does not work, take the Pillow and Zeitgeist 2 to a
different room where there are no other Bluetooth devices. Now place the Zeitgeist 2 on
the Pillow and repeat the steps in exactly the same order as described.
If this still does not work, either the hardware is defective or there is very strong radio
interference. There may also be a very mundane reason here: the battery of the
Zeitgeist 2 may need to be recharged or those in the Pillow replaced.
Note 2: In its current design, the Pillow is equipped with a little switch. If the Pillow is
switched off or the batteries replaced after successful pairing, the connection between
the devices will be restored automatically when it is switched back on or batteries
inserted, i.e. you do not need to repeat pairing.
Note 3: If the connection is to be cut, i.e. the Pillow disabled, you should deactivate both
the little switch on the Pillow and the Bluetooth Pillow function on the Zeitgeist 2. This
procedure is the same as for step 3 above, except here you select "Disabled".
This allows you to save the most battery power on both devices.
If you then switch them back on, pairing of course has to take place again.
7.10 Vibration
The Zeitgeist 2 can emit the clock time in vibration code from the home screen and
additionally vibrates as haptic feedback when various buttons are pressed.
You can use the Vibration item in the Settings menu to change the speed of the clock-
time vibrations and the intensity of vibrations emitted in response to all situations of the
device.
After you select this function in the Settings menu, you will hear the current values if you
press the Middle button SHORT .
Middle LONG
starts the setting. You first set the vibration intensity using
Top
or
Bottom
SHORT in 25% increments including "Disabled" for switched off. ("Disabled" does not
apply to the vibrations for output of the clock time; the previous value is retained here). A
relevant tactile demonstration of the intensity level takes place for each increment.
Confirm with
Middle SHORT
. The next step is to set the vibration speed for the tactile
clock time, with Slow, Medium and Fast available for selection here, likewise including a
tactile demonstration. The Zeitgeist 2 returns to the home screen following confirmation.
On delivery, the device has defaults of "100%" for vibration intensity and "Medium" for
vibration speed.
Note: The vibration settings selected here have nothing to do with Pillow / Bed shaker.