Caretec Zeitgeist 2, Руководство пользователя

Страница: 21 / 35

21
Note on Display north:
A range of plus/minus 10 degrees around north, i.e. between 350 and 10 degrees, is of
significance for playback of the North jingle.
This jingle will sound as soon as the compass enters this range (whether approaching
from the east or west), although there is no sound when leaving it.
Continuous mode:
Should the Zeitgeist 2 only ever announce the point of the compass without additionally
further specifying north, press the Bottom button SHORT .
Note:
If there is a change in measuring accuracy (for better or worse), the device will
respond with relevant jingles. This may interrupt ongoing voice output of the direction.
To return to North mode, press Bottom SHORT again.
Before changing the mode, the Zeitgeist 2 may still finish announcing the last compass
point.
Independently of the operating state:
Combination Top+Bottom SHORT ............ To return to the home screen
Middle LONG .............................................. To return to the main menu
Note:
As already mentioned in the section about resetting (RESET) the Zeitgeist 2,
basic measured values are determined for various sensors directly after RESET. This
also affects the compass circuit.
Should you observe major inaccuracies in functioning of the compass, a RESET might
help here; see RESET, section 5 for the detailed procedure.
This applies in particular if you hear the acoustic message "Compass initialization failed"
when calling up the compass.
6.7 Pedometer
Thanks to its built-in motion sensor, the Zeitgeist 2 can also be used as a pedometer
(please read the note below).
Here you only have to ensure that your physical movements are properly transmitted to
the device, for example by attaching it to your belt.
After you call up the pedometer in the main menu, it has to be switched on with
Top or
Bottom SHORT , and this confirmed with Middle SHORT .
You will then be asked whether the reading should be set to zero. Respond by pressing
Top or Bottom SHORT , and the Middle button SHORT to advance.
You have now reached the display for your steps. From this moment on, the device will
count movements resembling steps. Press Top or Bottom SHORT to hear the current
counter reading.
You can then use the
Middle button SHORT to return to the home screen. The
pedometer will continue running in the background.
The current reading is called up by selecting information retrieval for the pedometer
function in the main menu. To do so, press the Middle button SHORT .