Caretec Zeitgeist 2, Руководство пользователя

Страница: 28 / 35

28
Note: After the device is reset to the factory settings, the last active internal clock time
will be retained, although the time zone will be set to CET ("plus one hour") and daylight
saving time to "Europe". If you also want to have the precise clock time, you should
perform time synchronization immediately after reset using the function "GPS time"; see
section 7.8.
7.7 Hourly signal / Hourly reminder
The Zeitgeist 2 can be set to announce the full hour using a range of different signals.
After calling up this function, you will see a list in which you can select the type of
acoustic signal you wish to hear every hour.
Each entry is selected as usual with Top or Bottom SHORT and confirmed with Middle
SHORT.
You can choose between:
•
Disabled
•
Single beep .................. The full hour is indicated with a single beep.
•
Say time ....................... The time is output in words every full hour.
•
Cuckoo clock ............... The number of times the cuckoo calls corresponds to the
hour number (clock time, full hour) in 12-hour format.
You then specify the time period during which the hourly signal is to be output:
• Full day, i.e. on the hour throughout a 24-hour period every day.
• Part of a day, i.e. you specify the time period in which the selected hourly signal is
to be activated. You will next be prompted to enter the relevant start and end time
for the above period.
The hourly signal is not heard during the inactive time period, e.g. at night.
The Zeitgeist 2 finishes by giving an acoustic summary and returning to the home
screen.
7.8 GPS time
Automatic setting of the time is a handy feature for compact portable timepieces such as
the Zeitgeist 2.
This process does not however involve the DCF function of the tried and tested radio
clock, but is carried out via GPS satellite.