Carestream CS 7200, Руководство пользователя и инструкция по установке

Страница: 71 / 88

CS 7200 User and Installation Guide (6M0940)_Ed04
67
LED indicator blinks red.
No error message is
displayed.
The cause is unknown.

Restart the Scanner.

If problem persists, call Service.
LED indicator blinks red
during the Scanner power on
and the noise is sounded.
Scanner hardware malfunction. 
Restart the Scanner.

If the problem persists, repeat for three
times.

If problem persists, call Service.
LED indicator is red.
Error code
#9011
Scanner hardware malfunction. 
Restart the Scanner.

If problem persists, call Service.
LED indicator blinks red
Error code #9012
Scanner hardware malfunction. 
Restart the Scanner.

If problem persists, call Service.
LED indicator is red or off.
Error code
#9014
Scanner hardware malfunction. 
Restart the Scanner.

If problem persists, call Service.
LED indicator blinks red
Error code
#9015
Insertion panel is detached from the
scanner.

Properly attach the panel to the scanner.
Warning : Do not change the position of the
plate selector knob.

Click OK to close the error message and
proceed.
LED indicator blinks red
Error code
#9016
The plate was not scanned and
remained inside the scanner.

Remove the insertion panel.

While holding the visible part of the plate,
lift the scanner protection door.

Remove the plate from the scanner.

If the plate fell inside the scanner, remove
the service tray and remove the plate.

Attach the insertion panel.

Click OK to close the error message.

Perform a scan.
LED indicator blinks red
Error code
#9021, 9022,
9023
Scanner hardware malfunction. 
Restart the Scanner.

If problem persists, call Service.
LED indicator blinks red
Error code #9024

Scanner hardware malfunction.

Power Supply malfunction.

Restart the Scanner.

Replace Scanner Power Supply.

If problem persists, call Service.
LED indicator blinks red
Error code #9025
Scanner hardware malfunction. 
Turn off the scanner.

Wait for five minutes and restart the
Scanner.

If problem persists, call Service
.
LED indicator blinks red
Error code
#9030
Software files version does not match
the scanner files version.
Update scanner files.
LED indicator blinks red
Error code #9031
Scanner hardware malfunction. 
Click OK to shut down the scanner.

Restart the scanner. The plate is ejected.

Rescan the plate.

If the problem persists, call Service
.
LED indicator blinks red
Error code
#9032, 9036
Scanner hardware malfunction. 
Click OK to eject the plate.

Rescan the plate.

If the problem persists, call Service.
LED indicator blinks red
Error code
#9039
Scanner hardware malfunction. 
Restart the scanner.

If the problem persists, call Service.
LED indicator blinks red
Error code #9043

Plate was not loaded properly.

Scanner hardware malfunction.

Click OK to eject the plate.

Rescan the plate.

If the problem persists, restart the Scanner.

If the problem persists, call Service.
Symptom Cause Corrective Action