Carestream Carestream Vita Flex CR System, Руководство пользователя, Страница: 67 / 86

6K7304 | 2014-10-20 8–1
8
Troubleshooting the CR System
General Failures
Symptom Possible Cause Solution
Scanner does not turn on,
front panel LEDs are off.
• Power supply is not
connected to the scanner.
• Power supply is not
connected to the wall socket.
• Power supply failure.
• Connect the power supply to the
scanner and to the wall socket.
• Replace the power supply.
Front panel LEDs are blink-
ing in orange and the status
in the Image Suite notifica-
tion bar is
Not Ready .
• USB cable is not connected.
• Failure of the USB port on the
PC.
• Scanner driver is not recog-
nized by Windows.
• Verify that the USB cable is
connected to the PC.
• Connect the USB cable to a
different USB port on the PC, pref-
erably on the rear of the PC.
• Restart Windows.
Front panel LEDs are blink-
ing in orange and the status
in the Image Suite notifica-
tion bar is
Ready .
The Screen Transportation Unit is
not present or is not properly
secured.
1. Insert the Screen Transportation
Unit into the scanner and secure
the knobs properly.
2. Short-press the On/Off button to
reset the scanner.
Newer scanner embedded
files are available, please
update the scanner files
Embedded files of the scanner
hardware are not up to date and
do not match required files in the
software.
1. Exit the Image Suite software.
2. On the desktop, double-click the
Utility Center icon.
3. Log in to the system (username:
admin, password: 123456).
4. From the CR Tools options menu,
select POC Vita system settings.
5. From the Maintenance menu,
select Update Scanner’s Embedded
Files.
6. Click Update.