manualshive.com logo in svg

Carestream Carestream Vita Flex CR System, Руководство пользователя, Страница: 62 / 86

Поделиться
Скачать
Carestream Carestream Vita Flex CR System Скачать руководство пользователя страница 62

CR System Service Procedures

7–6

6K7304  |  2014-10-20

Note

Make sure that you release the clip before trying to remove the main power connector.

Install the Power Supply Cable

1. Connect the power supply cable and the USB cable to the CR System.

Note

You Must close the door to the power supply, if you do not close the door to the power supply 
properly, there is a risk of light penetration resulting in loss of image quality

2. Install the cable compartment cover at the rear of the CR System. See 

Install the Cable 

Compartment Cover

3. Plug the power supply into the Mains wall socket

4. Switch on the CR System by pressing the On/Off button.

Important

Make sure that you install the door at the rear of the 

CR System. If you do not install the 

door at the rear of the CR System, light can penetrate the system and affect image quality.

Содержание Carestream Vita Flex CR System























































































Отзывы:

Нет отзывов