Carel humiFog direct, Руководство пользователя

Страница: 8 / 44

8
ENG
"humiFog direct" +0300073EN rel. 1.0 - 31.03.2017
1.3 Cabinet part numbers
Fig. 1.b
The cabinets differ in terms of flow-rate delivered by the pump, power
supply voltage/frequency, and the capacity to control one or two
atomisation racks, managed independently from each other.
Part numbers available:
UA040DD100 40 l/h, 230V 50Hz, single zone
UA040DD200 40 l/h, 230V 50Hz, two zones
UA080DD100 80 l/h, 230V 50Hz, single zone
UA080DD200 80 l/h, 230V 50Hz, two zones
UA050DU100 50 l/h, 120V 60Hz, single zone
UA050DU200 50 l/h, 120V 60Hz, two zones
UA090DU100 90 l/h, 120V 60Hz, single zone
UA090DU200 90 l/h, 120V 60Hz, two zones
Tab. 1.a
N.B. to manage the 230V - 60 Hz power supply a 230V-120V transformer
can be installed upstream and connected to the cabinet. The transformer
must be installed according to safety standards in force.
1.4 Hose part numbers
The high pressure hoses (OD = 10 mm, ID = 6.4 mm) are supplied by
Carel in different lengths. The part numbers available are listed below.
All the hoses have with M16x1.5 female couplings with O-rings, ideal for
direct connection to the cabinet and the blower units without needing
to use sealants. Each hose kit includes an M16x1.5 nipple to be used for
coupling different hoses together.
Stainless steel pipes can also be used to connect the blowers to the
cabinet. The recommended outside diameter is 10 mm. This solution is
the installer’s responsibility.
Carel recommends using hoses rather than pipes.
UAKT005014 High pressure hose, L = 0.5 m
UAKT010014 High pressure hose, L = 1.0 m
UAKT020014 High pressure hose, L = 2.0 m
UAKT050014 High pressure hose, L = 5.0 m
UAKT100014 High pressure hose, L = 10 m
UAKT200014 High pressure hose, L = 20 m
Tab. 1.b
1.5 Blower unit part numbers
Fig. 1.c
The blower units differ based on the number of nozzles, the type of
nozzles (the nozzles are already pre-assembled in the factory), power
supply voltage/frequency and the direction of spray (front or two
directions).
Part numbers available:
P/N 230 V 50 Hz BLOWERS (CE)
DLA02DF000 Front blower 3.0 l/h (2 x 1.45 l/h nozzles) 230 V 50 Hz
DLA02DF100 Front blower 5.0 l/h (2 x 2.8 l/h nozzles) 230 V 50 Hz
DLA02DF200 Front blower 8.0 l/h (2 x 4.0 l/h nozzles) 230 V 50 Hz
DLA04DF000 Front blower 6.0 l/h (4 x 1.45 l/h nozzles) 230 V 50 Hz
DLA04DF100 Front blower 11.0 l/h (4 x 2.8 l/h nozzles) 230 V 50 Hz
DLA04DF200 Front blower 16.0 l/h (4 x 4.0 l/h nozzles) 230 V 50 Hz
DLA04DB000 Double blower 6.0 l/h (4 x 1.45 l/h nozzles) 230 V 50 Hz
DLA04DB100 Double blower 11.0 l/h (4 x 2.8 l/h nozzles) 230 V 50 Hz
DLA04DB200 Double blower 16.0 l/h (4 x 4.0 l/h nozzles) 230 V 50 Hz
DLA08DB000 Double blower 12.0 l/h (8 x 1.45 l/h nozzles) 230 V 50 Hz
DLA08DB100 Double blower 22.0 l/h (8 x 2.8 l/h nozzles) 230 V 50 Hz
DLA08DB200 Double blower 32.0 l/h (8 x 4.0 l/h nozzles) 230 V 50 Hz
Tab. 1.c
P/N 120 V 60 Hz BLOWERS
DLA02UF000 Front blower 3.0 l/h (2 1x .45 l/h nozzles) 120 V 60 Hz
DLA02UF100 Front blower 5.0 l/h (2 x 2.8 l/h nozzles) 120 V 60 Hz
DLA02UF200 Front blower 8.0 l/h (2x 4.0 l/h nozzles) 120 V 60 Hz
DLA04UF000 Front blower 6.0 l/h (4 x 1.45 l/h nozzles) 120 V 60 Hz
DLA04UF100 Front blower 11.0 l/h (4 x 2.8 l/h nozzles) 120 V 60 Hz
DLA04UF200 Front blower 16.0 l/h (4 x nozzles from 4.0l/h) 120 V 60 Hz
DLA04UB000 Double blower 6.0 l/h (4 x 1.45 l/h nozzles) 120 V 60 Hz
DLA04UB100 Double blower 11.0 l/h (4 x 2.8 l/h nozzles) 120 V 60 Hz
DLA04UB200 Double blower 16.0 l/h (4 x 4.0 l/h nozzles) 120 V 60 Hz
DLA08UB000 Double blower 12.0 l/h (8 x 1.45 l/h nozzles) 120 V 60 Hz
DLA08UB100 Double blower 22.0 l/h (8 x 2.8 l/h nozzles) 120 V 60 Hz
DLA08UB200 Double blower 32.0 l/h (8 x 4.0 l/h nozzles) 120 V 60 Hz
Tab. 1.d
120
120