Carel humiFog direct, Руководство пользователя

Страница: 18 / 44

18
ENG
"humiFog direct" +0300073EN rel. 1.0 - 31.03.2017
4.9 Production percentage analogue
outputs
The c.pHC controller provides an analogue output (0-10 V) corresponding
to the percentage of production that humiFog Direct is delivering.
The output replicates the request signal relating to the corresponding
humiFog Direct zone.
The production percentage analogue outputs are connected to the
following terminals:
•
zone 1: outputs 1 and 2 on terminal M8 on the c.pHC.
•
zone 2: outputs U3 and GND on terminal J2 on the c.pCOe.
Fig. 4.i Fig. 4.j
Important
: when several GND contacts are wired to the same terminal
these are equivalent to each other, and can be used indifferently.
% PRODUCTION
ZONE 1
SYSTEM
STATUS
% PRODUCTION
ZONE 2