M
IRAGE
2-S
TAGE
Service
Manual
Carefree of Colorado
18
052588-301r4
D08 A
WNING
D
OES
N
OT
M
OVE
W
HEN
R
EMOTE
C
ONTROL
B
UTTONS
A
RE
P
USHED
1.
Confirm power is ON at the touch-pad
--
Correct as required
2. Confirm batteries in remote are good. Pressing any
button on the remote will illuminate the LED at the top
of the remote.
Replace as needed
3.
Check the cable between the Receiver and control box. As
a continuity check, Pin 1 of connector 1 goes to Pin 1 of
connector 2; pin 2 goes to pin 2; pin 3 goes to pin 3 and pin
4 goes to pin 4.
Cable must be plugged into the "BUS" port of controller #1.
YES
Cable is OK. Confirm that cable is
securely plugged in; go to step 4
NO
Repair or Replace cable as required.
4.
Confirm that the Receiver is programmed for the
Remote
--
Refer to “Programming the Receiver”
on page 5 and retest. If system does
not work; go to step 5
5.
Program a second remote and test
YES
2
nd
remote works. 1
st
remote is
defective.
NO 2
nd
remote does not work; go to step 6
6.
Replace the Receiver and test.
(it will be necessary to program receiver for remote)
YES
System works OK. 1
st
receiver is
defective
NO
System does not work. Reinstall 1
st
receiver; go to step 7
7.
Replace control box
--
Содержание Mirage 2-Stage
Страница 4: ......
