22
■
Fuse
If the battery charger is turned on and no LEDs are illuminated, check the fuse.
Suggestion
Ask for help from CareCo to inspect or replace the fuse, as the tiller shroud has to be
removed before the fuse can be replaced.
▓
Tyres
The condition of the tyres depends on how you drive and use your scooter.
Inspecting tyre tread
Please check the tread groove regularly. Replace the tyres when the tread groove is less
than 0.5 mm.
Attention
１
.
When tread groove is below 0.5mm the scooter may not grip well, making braking
distances longer. Therefore replace the tyres as soon as they are found to have insufficient
tread depth.
２
.
The tyre pressure should be kept at about 26 PSI (approx. 1.8KG/cm) for the best ride
and handling.
Attention
When conducting maintenance of your vehicle, please turn the power switch to OFF and
remove the charger cords.
Suggestions
Do not splash water directly to wash your scooter as this could lead to malfunction of
the system
electrics.
Do not use petrol, solvents or vaporising solution as these may damage the shrouds.
Do not use wax.
6.4 STORAGE
When storing the scooter:-
-
Make sure the seat is set in the ‘Forward’ position
-
Make sure the Power switch is turned to OFF
Suggestion
Store the scooter out of direct sunlight, rain and damp conditions. When storing for a
length of time, please charge the battery to full power and then disconnect the battery
terminal. For details contact CareCo on 0845 611 8022 or email: [email protected]
6.5 MANUALLY MOVING THE SCOOTER
Turn the power switch to ‘OFF’ before moving.
Lift the scooter by the chassis, and not by the bumpers. Lifting the scooter by the bumper
could cause damage or injury.
For your safety, always ask for assistance.
