Care of Sweden CuroCell S.A.M. PRO, Инструкция по эксплуатации

Страница: 5 / 20

5
2 Assembly and installation
When unpacking, check that no parts are damaged. If any damage is found, contact Care of
Sweden or your local distributor before using the product.
1a. If the mattress is an overlay mattress, place the mattress on top of an existing mattress. If
possible, secure it by pulling the elastic bands on the bottom over the corners of the
underlying mattress.
or
1b. If the mattress is a replacement mattress and have an integrated foam core (CuroCell
S.A.M.® PRO CF16), place the mattress directly on to the bed base. Use the straps on the cover
to fasten the mattress to the bed base.
2. Hang the pump by the foot end of the bed or place it on a flat, sturdy surface. Place the
power cable so there is no risk of stumbling over it, run it over with the bed wheels or getting
it jammed when raising or lowering the bed.
3. Connect the air tubes coming from the mattress to the side of the pump. The pump and
hoses are equipped with quick connectors; an audible “click” will be heard when these have
been connected correctly.
4. Check to make sure that the power is set to “0” (off). Plug the power cable into an approved
outlet (110 or 220 V depending on the country and the voltage level) that is easily accessible.
Note!
• Check that the CPR valve is closed.
• Make sure that the mattress is the correct size for the bed.
• Make sure the feet are not in direct contact with the brackets of the pump as this may
cause damage to the skin.