11
3.8 Pack&Go
®
function (deflation)
After use, the product can easily be packed as
follows:
•
Ensure that no-one is lying on the
mattress.
•
Press the Pack&Go® button and hold
it down for 2 seconds.
The Pack&Go
®
diode will flash during deflation. The mattress
will empty of air and be ready to be simply folded together
within 20 minutes. The control unit gives an audio signal
once deflation is complete.
Carefully fold the mattress together, place the control unit
between the folds of the mattress and place the system in a
transportation bag (accessory) or equivalent for protective
storage. Ensure that the power supply is packed complete.
3.9 Restart
If a restart is
required, set the
On/Off switch on
the side of the
control unit to
position 0 (Off).
Wait for approx. 10
seconds and restart
the control unit.
The control unit
will now start up. See section 3.1.
