Cardinal Health IVAC 571, Техническое и сервисное руководство

Страница: 67 / 104

IVAC® Volumetric Pump (Models 571 & 572) 67/104 1000SM00018 Issue 2
Spare Parts Replacement Procedures
Cover Assembly, Handle, Bumpers, Fastener Clips
Replacement Procedure
1. Using a right-angled Phillips screwdriver, remove the two screws securing the handle to the case. Remove the handle.
2. Remove the four screws which secure the bumpers to the bottom of the case. Remove the bumpers.
3. Reassemble in reverse order.
Body Assembly
(continued)
Spare Parts
Item Description Part Number
A KIT,COVER ASSY,CE,ENG,572 141555
A KIT,COVER ASSY,CE,ITAL,571 141553
A KIT,CVR ASSY,CE,SWED,571 136740
A.1 SHIELD,PW BD 125749
A.2 SCREW,MACH,8-32X3/8,PNH,PHH,S 304330
A.3 ASSY,HANDLE/CAP,57X(BOM) 134857
A.4 SHIELD,PW BD 125412
A.5 SHIELD,MYLAR,XFMR CASE,57X 129408
A.6 SCREW,MACH 6-32X1/4 PNH PHH 300330
A.7 BUMPER,MLD 2093 W/ST WSHR INS 301749
Refitting note:
When refitting the handle, use adhesive on the two
fixing screws.
( A.7 ) Bumper (x4)
(
A.1
) Mylar Shield
( A.2 ) Screw (x2)
( A.3 ) Handle
(
A.4
) Mylar Shield
( A.6 ) Screw (x4)
Case Cover
(Part of cover assembly A , not
available separately)
(
A.5
) Mylar Shield
To provide a clear view of the
fitting area, the illustration below
shows a front view of the case.
Fitting is only carried out from the
rear of the case.