Cardax Prox Plus Mifare, Инструкции по установке

Страница: 2 / 16

2 Part number 3C4480 R10
May 2005
ƒ 4 x Self-tapping pan-head screws
ƒ 4 x 10 mm plastics screw caps
ƒ 1 x M4 x 12 tamper-resistant Torx-head machine screw
Power supply requirements
Each Prox Plus Mifare reader consumes 200 mA from a 13.6 V
± 15% DC supply.
Use a linear-regulator power source.
Note :
Switch mode power supplies are not recommended as they may
reduce the read range of the Prox Plus Mifare reader.
Firmware
The reader firmware has two variants. These are set out in the
table.
Firmware identification Capability
vR1.06 and earlier Reads Philips Mifare 1K cards.
vR2.05 and later ƒ Reads Philips Mifare 1K cards
ƒ Reads all sectors of Philips Mifare 4K cards
Depending on the type of firmware, there is a difference in the
sequence displayed on the reader's screen after power has been
applied.