Part number 3E1100 R16
7
July 2010
Connecting to the Cardax FT Controller 3000-4R or 3000
The Cardax FT Controller 3000-4R and 3000 both interface the following
types of reader into the Cardax FT Command Centre system:
•
Cardax IV readers, including Prox Mifare Series (Teardrop) readers
•
Wiegand readers
Each Cardax FT Controller 3000-4R can interface up to four Prox Mifare
Series (Teardrop) readers into the Cardax FT Command Centre system, and the
Cardax FT Controller 3000 can interface up to eight Prox Mifare Series
(Teardrop) readers.
The ports to which the Prox Mifare Series (Teardrop) reader can connect are
set up as groups, as follows:
•
Two groups (numbered 1 and 2) on the Controller 3000-4R, and
•
Four groups (numbered 1 to 4) on the Controller 3000.
Each group provides connection for two Prox Mifare Series (Teardrop) readers
or other Cardax IV readers. Refer to the following diagram for the location of
the ports on the Cardax FT Controller 3000.
Note:
Even though there are only two groups of ports on the Cardax FT
Controller 3000-4R, they are located in the same position.
P4
P3
P1
P2
P4
PF4
PF3
PF2
PE4
PE3
PE2
PF1
PE1
DETECTOR
LED
RS485
PA4
PA3
PA2
PA1
PA4
POWER
OUT
PA3
POWER
OUT
PA2
POWER
OUT
PA1
POWER
OUT
PB4
PB3
PB2
PB1
PC4
PC3
PC2
PC1
PD4
PD3
PD2
PD1
PC1
PC2
PC3
PC4
PD4
PD3
PD2
PD1
PA1 to PA4
Power Out
pin 1 = power out
pin 2 = 0 V
Group 4
Group 3
Group 2
Group 1
PB1 to PB4
2 x Cardax IV Readers
per connector
Reader 1 = pins 1 & 3
Reader 2 = pins 2 & 4
Pin 1 = Reader 1 transmit
Pin 2 = Reader 2 transmit
Pin 3 = Reader 1 receive
Pin 4 = Reader 2 receive
J1 to J4
RS485
terminating resistors
PC1 to PC4
Inputs
pin 1 = Input 1
pin 2 = Ground
pin 3 = Input 2
