8
Part number 3E1100 R16
July 2010
Make the connections from the Prox Mifare Series (Teardrop) reader to either
the Cardax FT Controller 3000-4R or 3000 as shown:
Cardax FT Controller 3000-4R or 3000
PA
Group
PB1 and PA1... to... PB2 and PA2 (3000-4R)
PB4 and PA4 (3000)
4 3 2 1
2 1
PB
Prox Mifare
Reader 1
Prox Mifare
Reader 2
Note:
Within each group, you cannot mix Cardax IV readers with Wiegand
Readers. This is because connecting one Wiegand reader requires all four pins
on plug PB. For example, if you connect a Prox Mifare Series (Teardrop)
reader to Port 1 of Group 1, Port 2 of Group 1 can only connect to another
Cardax IV reader.
The terminating resistors (J1 for Group 1, J2 for Group 2, etc.) must NOT be
fitted for those groups to which Prox Mifare Series (Teardrop) readers are
connected.
Configuration
The Prox Mifare Series (Teardrop) reader is configured as a “Cardax IV
Reader” in Cardax FT Command Centre.
No specific initialisation or hardware configuration is required.
