Part number 3E1100 R16
3
July 2010
**
CAT 5 is not recommended for security systems as this cable has solid
copper conductors and is designed for use with RJ45 insulation displacement
connectors.
Distance between Proximity Readers
The distance separating any two proximity readers must not be less than
200mm in all directions.
200 mm
When mounting a proximity reader on an internal wall, check that any reader
fixed to the other side of the wall is not less than 200mm away.
Mounting
Note:
The Prox Mifare Series (Teardrop) reader has been designed to metric
specifications. Therefore any imperial measurements provided are
approximate only.
The Prox Mifare Series (Teardrop) reader is designed to be mounted on any
solid flat surface. However installation on metal surfaces, particularly those
with a large surface area will reduce read range. The extent to which the range
is reduced will depend upon the type of metal used. To minimise this effect,
plastic spacers which may be mounted between the reader and the metal
surface are available (Part number C190980). Please contact your local Cardax
dealer for more information.
