26
Doc Version: 1.3 / Date: 29.04.2021
4)
The dispenser
does not dispense
coffee
a)
Filter adapter in the intake line is
clogged.
Check if the filter strainers are clogged.
b)
Strainer of the jet-nozzles outlet
spout is clogged (tap nozzle top
part)
Check if jet jet-nozzle strainer is clogged.
c)
Little holes in the nozzle disc are
blocked (tap nozzle bottom part)
Check if holes in the nozzle bottom part
are free
d)
Air compressor is turned off or has
no electrical power.
Check whether the PRESSURE switch at
the side of the dispenser is turned on and
if the dispenser has power.
e)
The Linktech adapter of the intake
line is not pushed properly into the
dispenser socket.
Push intake line adapter properly into
dispenser socket.
f)
Coffee is frozen
To achieve the 5°C dispense
temperature the dispenser inside
cools down a bit lower. Sometime
it overcools the liquid and the
coffee can freeze.
Set the temperature knob on the front to
0 and wait about 30 minutes. Then try
again.
g)
If the dispenser was used without
filter adapter in the intake line,
coffee particles (in case of
insufficient filtration) can get into
the pump and damage or block
valve parts. This could lead to the
situation that no liquid is sucked
any more.
Pump must be changed.
Contact a Service Technician or check the
service manual.
