12
Tamper Warning at Disarm
If the alarm had been triggered while you were away from the
vehicle, upon disarming, a 4-chirp tamper disarm warning will
occur. In addition to the 4-chirp warning, the status LED will
flash a distinctive number of times to indicate which alarm
zone set off the alarm.
Tamper LED Flashes Trigger Source
1
Doors
2
Trunk
4
Onboard Shock Sensor
5
Ignition Voltage
6
Tilt Sensor
7
Hood
Forced Passive Arming
As additional protection, the Forced Passive Arm feature will
arm the security system 1 hour after exiting the vehicle. In some
cases, you may forget to press the button to arm your
system. Forced Passive Arming will keep the vehicle protected.
By default, this system is ON and active unless programmed
differently by the installer.
