11
Valet Mode (By Remote)
Valet mode is a convenience when you take your car in for
service or allow someone who may not be familiar with your
security system to drive your vehicle. To activate Valet Mode
using your remote control. Repeat the following procedure.
1. Open the driver’s door.
2. Press then then on your remote control.
3. The LED status indicator will be on solid.
- Parking lights flash fast 9 times.
4. Repeat 1 and 2 above to exit Valet Mode.
The status LED indicator will be off.
- Parking lights flash slow 9 times.
Trigger the System
If at any time the system becomes triggered, the horn/siren will
sound for 30 seconds and then re-arm. If a protected entrance is
left open, the alarm will sound for three, 30 second cycles and then
the protected entrance is bypassed while the remaining detection
zones are active.
Progressive Door Trigger
This feature is ON by default and can be programmed off by the
installer. When your CARBINE system is armed and a door is
opened, instead of “full alarm mode” the system will chirp the
horn/siren 10 times prior to going into full alarm mode.
