Carbide 3D Shapeoko Z-Plus, Инструкция по сборке

Страница: 23 / 36

support@carbide3d.com docs.carbide3d.com
8/26/2020 Version 1.0
23
Install the Drag Chain
Install the Drag Chain to the X- and Y1-Rails
Z-Plus Upgrade Kit:
Item Description Qty
W M3
×
4mm Flat Head Screw 6
1. Position the X-rail to the back of the machine.
2. Lay the drag chain on the rails. See Fig. 26 .
a. First, place the three cables not
threaded through the X-Axis drag chain
(the Y-Axis proximity switch cable and
the Y1- and Y2-motor leads) over and
behind the X-rail
b. Second, lift the drag chain and place it
across the Y1- and X-rails.
c. Lay the drag chains so that the tail of
the Y-Axis drag chain will curl under and
the head of the X-Axis drag chain will
curl up.
Figure 26
Shapeoko 3 Machines:
Skip ahead to the “Install the Proximity Switches” section on page 25.