Carbide 3D Shapeoko Z-Plus, Инструкция по сборке

Страница: 13 / 36

support@carbide3d.com docs.carbide3d.com
8/26/2020 Version 1.0
13
Assemble the Z-Plus — Front
Z-Plus Upgrade Kit + Carryover Components:
Item Description Qty
C Tramming Plate 1
D M5 × 8mm Socket Head Cap Screw 4
G Z-Axis Proximity Switch (200mm XXL, 200mm XL, and 610mm Shapeoko 3) 1
N M3
×
18mm Socket Head Cap Screw 2
II Spindle/Router Mount [CARRYOVER] 1
JJ M5 × 16mm Button Head Cap Screw [CARRYOVER] 2
KK Router Mount Adapter Ring (Optional) [CARRYOVER] 1
The tramming plate is a feature of the Z-Plus which
allows you to easily adjust left/right tilt of the
router/spindle. The
tramming plate’s four mounting
holes are slightly enlarged providing a small amount of
wiggle room around the screws and allowing you to
tram your router/spindle in relation to the X-Axis. See
Fig. 11 .
Install the Spindle/Router Mount to the
Tramming Plate
1. Attach the spindle/router mount to the
tramming plate. See
Fig. 12 .
a. Position the tramming plate with the
larger notch at the top.
b. Align the router mount with the two
available screw holes across the
center of the plate.
c. Use a 3mm hex key and the two (2)
M5
× 16mm BHCS to secure the mount
to the plate.
Figure 12
Figure 11
NOTE: See Tramming Instructions at the end of
this guide for more information on tramming.