CARAVITA AMALFI DUO-QUADRO, Инструкция по установке и эксплуатации

Страница: 43 / 104

Operation
5.2 Levelling the canopy (optional)
The canopy can be levelled. The mechanism is not intended to position the canopy at a slant. The inclination of the canopy is
adjusted using two adjusting screws that are located behind the cover panels at the upper end of the arm.
The canopy is attached.
Tilting the canopy outward
1 Release the lock nut of the upper screw.
2 Screw in the upper screw until the desired inclination is achieved.
The upper screw is in contact with the pole head.
3 Tighten the loosened lock nut.
The upper screw is secured.
4 Unscrew the lower screw until it is in contact with the arm.
INFO
Both screws must be in contact with the arm. The mechanism
should not jiggle.
Tilting the canopy inward
1 Release the lock nut of the lower screw.
2 Screw in the lower screw until the desired inclination is achieved.
The lower screw is contact with the pole.
3 Tighten the loosened lock nut.
The lower screw is secured.
4 Unscrew the upper screw until it is in contact with the arm.
INFO
Both screws must be in contact with the arm. The mechanism
should not jiggle.
4000257 [v0]/2022-01-01 43 | 104