Caravaggi 20 SP, Инструкция по эксплуатации и обслуживанию

Страница: 18 / 24

8.2.1 Hydrostatic drive disengagement and adjustment
When the engine is not running, the grinder cannot be moved, since the
hydrostatic drive is in locked position (fig.5b Capt. 4): on the belt guard
side, there is a handle push handle forward and down, this will unlock the
hydrostat unit and allow freewheeling.
When the engine is running, there is power to the transmission, Be careful
to only move slowly, the control valve to transport the machine in a forward
or reverse direction. The travel speed is determined by the rpm of the
engine, and how quickly the control valve is moved.
When using grinder on unlevel ground, the grinder may have a tendency to
creep down hills. The brake control located on the control panel can be
pulled so as to lock the disc brake on the transmission.
Attention: damage can occur to brake if to much pressure is applied.
Handbrake adjustment:
Fig. 10 Fig. 11
Adjustment self lock nut
Brake lever
Adjustment screw