24
EMERGENCY DISASSEMBLY
In the case of a failure of the electronic control, in
order to avoid moving the vehicle with the open
antenna, you can remove the dish and manually
bring the LNB holding arm to the rest position
(horizontal) with a few simple disassembly
operations.
However, after this you must take the unit to an
authorised repair centre in order to restore the
system.
1. reflector unit disassembly
Tie together
q
the two pipes of the LNB holding arm
(fig. 16).
Using the 6mm Allen key provided, carefully
unscrew the lateral screws from the motor assembly
q
. Remove the screws and the locking ferrules
w
(fig.
17).
remove the reflector unit from its seat
q
(fig. 18).
Put the feed holding arm in the horizontal position
q
.
Put the locking ferrules again in their seat and insert
the screws
w
(fig. 19).
Firmly tighten the screws to lock them, using the 6mm
Allen key provided in the package (fig. 20).
fig.16
fig.18
fig.17
fig.19
fig.20
