18
Technical data
1)
S
This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
2) Equipment marked IP23 is designed for indoor and outdoor applications.
POWER SOURCE
CMI 3000 II
Mains voltage ±15% (50-60Hz), V
- Autotransformer optional ±15% (50-60Hz), V
3x400
3x230-500
Minimum generator size, kVA
18.5
Fuse, A
16
Mains current, effective, A
16.5(380V)/15.7 (400V)
Mains current, max., A
19.0 (380V)/18.1 (400V)
Power, 100%, kVA
10.9
Power, max., kVA
12.5
Power, open circuit, VA
40
Efficiency
0.85
Power factor
0.90
Current range, A
15-300
Duty cycle, 100% 20°C (MIG), A
300
Duty cycle, max. 20°C (MIG), A/%
300/100
Duty cycle, 100% 40°C (MIG), A/V
270/30.8
Duty cycle, max. 40°C (MIG), A/%/V
300/80/32.0
Open circuit voltage, V
69-76
1)
Sphere of application
S/CE
2)
Protection class
IP23
Wire feed speed, m/min
0.5-30.0
Torch connection
EURO
Wire-reel diameter, mm
300
Wire diameter, mm
0.6-2.4
Gas pressure, MPa (bar)
0.6 (6.0)
Standards
EN/IEC60974-1.
EN/IEC60974-5.
EN/IEC60974-10
Dimensions (HxWxL), mm
906x524x925
Weight, kg
58
FUNCTION
PROCESS
VALUE RANGE
Selection of trigger mode, 2-times / 4-times
MIG/MAG
2/4
Control of current/voltage/ wire feed speed
-
local/torch control/remote control
Wire inching
MIG/MAG
yes
Hot-start %
MMA
0.0-100.0
Hot-start-time, sec.
MMA
0.0-20.0
Arc power, %
MMA
0.0-150.0
Gas pre-flow, sec.
MIG/MAG
0.0-10.0
Soft-start, m/min
MIG/MAG
0.5-24.0
Hot-start, %
Synergic
-99 - +99
Hot-start-time, sec.
Synergic
0.0-20.0
Slope down time, sec.
Synergic
0.0-10.0
Stop Amp, A
Synergic
0-100
Stop Amp time, sec.
Synergic
0.0-10.0
Burn back
MIG/MAG
0-30
Gas post-flow, sec
MIG/MAG
0.0-20.0
Sequence timer / Spot welding time, sec.
MIG/MAG
0.0-50.0
DUO Plus™ efficiency, %
MIG/MAG
0-50
DUO Plus™ time, sec.
MIG/MAG
0.1-9.9
Electronic choke
-5.0 - +5.0
Sequence, Sequencesteps
9
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: CMI 3000 II
conforms to directives: 2014/35/EU
2014/30/EU
2011/65/EU
European standards:
EN/IEC60974-1
EN/IEC60974-5
EN/IEC60974-10 (Class A)
Issued in Fjerritslev 17.05.2017
Niels Jørn Jakobsen
CEO
