6
STORAGE
Store the Li-ion Mini Jumper and charging adapters in a clean and dry area.
Be sure to keep the charging adapters supplied with this product stored
separately from similar items as only charging adapters included with this unit
are compatible. Using a non-compatible charger could cause damage to the unit
or personal injury.
The Li-ion Mini Jumper may also be stored in a vehicle for use in roadside
emergencies. To prevent the unit and any of the accessories from being
damaged, please ensure that it is properly secure and in a safe place inside
the vehicle.
CLEANING
All exterior surfaces of the Li-ion Mini Jumper can be wiped clean with a
soft cloth dampened with a mild soap and water solution. Do not immerse or
submerge any part of Li-ion Mini Jumper in water or any other solvent. Never
use solvents or cleaning agents containing petroleum (petrol, kerosene, oil),
paint thinner, turpentine, alcohol, or ammonia. Harsh materials like these can
damage surfaces.
MAINTENANCE
Only qualified service personnel must perform repairs. Do not open the exterior
casing of the Li-ion Mini Jumper as there are no user serviceable parts inside.
Opening or visible attempts to open or repair the unit may void any guarantee
and / or cause damage to the product or personal injury. LED bulbs will never
wear out under normal conditions and do not need to be replaced. Rechargeable
battery pack cannot be replaced.
CARE AND MAINTENANCE
1. Plug the micro USB charging jack cable into the micro USB charging port on
the front of the unit
2. Plug the other end of USB cable into a USB charging port
3. The LED battery status indicator lights will come on while charging is in
progress.
4. The battery will be fully charged after approximately 3-4 hours and the LED
charging indicator light will turn OFF when the unit is fully charged.
5. Disconnect the charging cable from the unit first and then the other end
from the USB power outlet.
TO PREVENT OVERCHARGING DO NOT CHARGE FOR MORE THAN 8 HOURS.
Using The USB Charging Cable
