background image

2

READ AND UNDERSTAND ALL WARNINGS AND THE ADVISORY NOTES INCLUDED 

IN THIS MANUAL. FOLLOW INSTRUCTIONS PROVIDED BY YOUR VEHICLE 

MANUFACTURER AND MANUFACTURER OF THE DEVICES INTENDED TO BE USED 

WITH THIS POWER SUPPLY. 

MAKE CERTAIN THIS DEVICE IS FULLY CHARGED PRIOR TO FIRST USE.

THIS PRODUCT CONTAINS A LITHIUM ION BATTERY AND MUST BE DISPOSED OF

PROPERLY. YOU MAY CONTACT YOUR LOCAL GOVERNMENT RECYCLING AUTHORITY 

FOR APPROPRIATE DISPOSAL.
To prevent serious injury or damage:

• DO NOT open, drop, short-circuit, incinerate, expose temperatures higher than 

140°F, or change /use if damaged.

• Only use the Charging Adaptors provided with unit. Use of any other adaptors  

  may damage the tool or result in a fire.

• Do not submerge in water or any other liquid.

• Do not operate in explosive atmospheres, such as in the presence of flammable  

  liquids, gases or dust.

• Do not charge the Work Light more than 8 hours. Overcharging will cause  

  overheating and shorten battery life.

• Read warnings on the package before use.

• Do not shine directly into the eyes

• Failure to follow the instruction may cause damage to the product and / or  

  personal injury.

• Do not use with dry cell batteries. These batteries may burst and cause injury 

  to person or damage personal property.

• Do not attempt to face the battery being jumped. Stay away as far as possible  

  from the battery when making the final connection.

• DO NOT CONNECT TO or jump start a 6 or 24 Volt battery system.

• DO NOT smoke, use matches, lighters or an open flame near batteries.

• Never allow red (Positive) and black (Negative) clamps to come in contact with  

  each other or contact with metal object at the same time.

• To protect against electrical hazards, do not immerse charger, adapters, or unit  

  in water or otherliquid.

Pursuant to California Proposition 65, this product may contain chemicals known 

to the State of California to cause cancer, birth defects or other reproductive 

harm; Wash your hands after handling.

IMPORTANT INFORMATION

CAUTION!

WARNING

IMPORTANT ADVISORY NOTES

Содержание LI1006B









Отзывы: