Car and Driver LI1006B Скачать руководство пользователя страница 3

3

• Close supervision is necessary when working near children.

• Do not use unit for applications other than its intended use.

• Always connect the red (+) clamp to the positive battery terminal first.  

  Connect black (-) clamp to the negative battery terminal as final connection.

• Jumpstart vehicles in a well ventilated area only.

• Do not expose the Li-ion Jumper to moisture and use it in extremely hot  

  conditions.

• Never work alone with this product. Make sure that someone is available to  

  give assistance if needed.

• Wear complete eye and clothing protection. Do not touch eyes while working  

  near battery.

• Do not attempt to remove or replace the battery used in this device. When  

  the battery has reached the end of its useful lifetime, take the entire unit to  

  a battery recycling facility.

• For proper and safe operation of the 5 Volt USB power port, do not place  

  anything into it except the plug of the accessory to be used.

• Remove metal, personal jewelry, such as: rings, bracelets, necklaces and  

  watches, while working with a lead acid battery. This can produce a short- 

  circuit that may cause severe burns.

• Never charge or jump-start a frozen battery.

• Do not operate this device while wearing vinyl clothing. Static electricity may  

  be generated when vinyl clothing is rubbed.

• This product is not intended for use in the rain or temperatures above 150ºF.

• Use only the provided chargers, cables and clamps. Unauthorized parts may  

  damage the unit.

• This product has no consumer serviceable parts except the replaceable fuses.

• Keep out of the reach of children.

• Keep battery terminals clean. Be careful to keep corrosion from coming in  

  contact with eyes.

• Do not let the cords of the Li-ion Jumper or clamps get wet.

• Prevent water to get into the Li-ion Jumper housing. Water will damage the  

  internal electronics board.

• This unit has a built-in Li-ion Battery. Although the unit arrives partially  

  charged from the factory, it MUST be fully charged before the first use.

• Recharge the unit after each use or every 3 months preventing the battery  

  voltage to become extremely low.

Содержание LI1006B









Отзывы: