Caple WI6225, Техническая информация

Страница: 20 / 20

14
the transformer
1 >
．
Remove the 2 screws (1)
；
( Fig.14)
2 >
．
Remove the electrical box
；
( Fig.14)
3>
．
Unplug all the connecters, then press the head of each of the four plastic screws
（
4
） ，
move up-ward
the power PCB
（
A
） ，
then replace a new one. ( Fig.14) (View K)
4>
．
Plug all the connecters;
（
Fig.13
）
5>
．
Remove the 2 screws
（
B
）
and transformer, then replace a new transformer. ( Fig.14)
○
How to replace the LED light
The process of LED light removed: remove all shelve in the zone
→
take apart the inner electrical box
→
disconnect
light connector
→
(if necessary remove the main PCB)
→
remove the LED light
1>. Follow the removing methods to remove the PCB board; (Fig.10 & Fig.11)
2>. Then you will see the LED light is divided in to 3 parts, then pull out the line (1)follow the arrowhead
’
s
heading; (Fig.15)
3>. Pull out fasteners of the LED installed board (B) follow the View K point l
，
at the time peak up the LED
light board (A)
，
then change the LED light board.
REV.C
Fig. 15