Instruction manual DI631
Instruction manual DI631
14
15
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
»
After the lower basket has been removed, unscrew and remove the cap from the
salt container.
(1)
»
Place the end of the funnel (supplied) into the hole and insert about 1.5kg of dishwasher salt.
»
Fill the salt container with water. It is normal for a small amount of water to come out of the
salt container.
(
2)
»
After filling the container, screw the cap tightly back on, turning clockwise.
»
The salt warning light will turn off after the salt container has been filled with salt.
»
Immediately after filling the salt into the salt container, a washing programme should be
started. Otherwise the filter system, pump or other important parts of the machine may be
damaged by salty water.
N OT E :
1. The salt container must only be refilled when the salt warning light in the control panel comes
on. Depending on how well the salt dissolves, the salt warning light may still be on even though
the salt container is filled.
2. If there are spills of the salt, a soak or a rapid programme should be run to remove the
excessive salt.
F I L L T H E R I N S E A I D D I S P E N S E R
R I N S E A I D D I S P E N S E R
The Rinse Aid is released during the final rinse to prevent water from forming droplets on your
dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the
dishes. Your dishwasher is designed to use liquid Rinse Aids. The Rinse Aid dispenser is located
inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the
Rinse Aid into the dispenser until the level indicator turns completely black. The volume of the
Rinse Aid container is about 110ml.
F U N C T I O N O F R I N S E A I D
Rinse Aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and
streak free drying.
AT T E N T I O N :
Only use branded Rinse Aid for dishwasher. Never fill the Rinse Aid dispenser with any other
substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
W H E N TO R E F I L L T H E R I N S E A I D D I S P E N S E R
The Rinse Aid warning light in the control panel will illuminate when the dispenser needs re-filling.
You can also estimate the remaining amount from the colour of the optical level indicator “C“
located next to the cap. When the Rinse Aid container is full, the whole indicator will be dark. As
the Rinse Aid diminishes, the size of the dark dot decreases. You should never let the Rinse Aid
level fall 1 / 4 full.
As the Rinse Aid diminishes, the size of the black dot on the Rinse Aid level indicator changes, as
illustrated below:
Full
¾ full
½ full
¼ full - Should refill to eliminate spotting
Empty
9
To open the dispenser, turn the cap t o t he "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned wit h "open" arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, incre ase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are show spots, adjust the dial to the next
hig her lever until your dishes are spo t-free. The recommended setting is "4".
(Factor y value is "4".)
Increase the dose if there are drops of water or lime spots on t he dishes af ter washing.
Reduce it if there are sticky whitish stains on your dish es or a bluish film on glassware or
knife blades.
1
2
3
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
of the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole
indicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall 1 / 4 full.
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher.
Most of the commercial quality detergents are suitable for this purpose.
" "
Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser until you're ready to wash dishes.
Attention!
C
(Rinse-Aid indicator)
1
2
3
1. To open the dispenser, turn the cap to the “open” (left) arrow and lift it out.
2. Pour the Rinse Aid into the dispenser, being careful not to overfill.
3. Replace the cap by inserting it aligned with “open” arrow and turning it to the closed
(right) arrow.
N OT E :
Clean up any Rinse Aid spilled during filling with an absorbent cloth to avoid excessive foaming
during the next wash. Don’t forget to replace the cap before you close dishwasher door.
9
To open the dispenser, turn the cap t o t he "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned wit h "open" arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, incre ase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are show spots, adjust the dial to the next
hig her lever until your dishes are spo t-free. The recommended setting is "4".
(Factor y value is "4".)
Increase the dose if there are drops of water or lime spots on t he dishes af ter washing.
Reduce it if there are sticky whitish stains on your dish es or a bluish film on glassware or
knife blades.
1
2
3
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
of the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole
indicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall 1 / 4 full.
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher.
Most of the commercial quality detergents are suitable for this purpose.
" "
Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser until you're ready to wash dishes.
Attention!
