560
50
877
888
min.
555
555
594
540
20
6
The oven is designed to fit into a cabinet
600 mm width. The oven should be built
into kitchen units (figs. 4a - 4b), but you
must ensure that it is properly in the dia-
gram the oven is ventilated by mean of
the space in the top of the kitchen cab-
inet (see diagram).
Failure to allow adequate ventilation for
the appliance may result in over heating
or damage to adjacent units.
Caple does not accapt any responsibil-
ity for any damage caused due to non-
compliance with these instructions.
To install the oven into a kitchen unit
(figs. 4a - 4b) first ensure that the oven
housing is firmly secured to the wall
and/or adjacent fittings.
Lift the oven carefully into position on the
shelf, taking care NOT to lift it by the
door handle.
If you lower the oven door, you will see
four screw holes, two on each side of the
oven.
The oven should then be secured to the
housing by fitting screws into these
holes.
Fig. 4a
Fig. 4b
Dimensions
(mm)
Height
Width
Depth
888
594
560
877
560
555 min.
Housing
Oven
You need the following housing area to
fit your oven correctly.
This appliance is type X installation.
How To Install Your Oven
560
50
877
888
min.
555
555
594
540
20
